|
Power
requirements |
| voltage/current
|
-18
Volts @ 220mA
+18
Volts @ 240mA |
|
|
VCO
(x2) |
| inputs |
6
x Exponential FM
2 x linear FM. +/-25% modulation from -15V to +15V
2 x pulse width. 0-100% from -5V to +5V
1 x sync with adjustable trigger level |
| outputs |
1
x sawtooth
1 x rectangular
1 x triangle
1 x sine |
| extras |
uses
a +/-10V reference for higher stability
improved
sync circuitry |
|
|
|
| inputs |
4
x cutoff CV+
1 x cutoff CV-
4 x signal in |
| outputs |
1
x low-pass
1 x band-pass
1 x high-pass
1 x notch |
| extras |
Includes
series resistors on all outputs |
|
|
|
| inputs |
3
x signal in
3x cutoffl CV |
| outputs |
1
x output |
|
|
VCA
(x2) |
| inputs |
2
x +signal in
1 x -signal in
3 x amplitude control CV |
| outputs |
1
x output |
| extras |
Includes
option for de-oscillation capacitor |
|
|
ADSR
(x2) |
| inputs |
1 x
GATE
1
x Re-Trigger |
| outputs |
1
x ADSR out |
| extras |
Includes
GATE input diode protection and ATTACK current limit protection |
|
|
VCLFO
(x2) |
| outputs |
1
x triangle out
1 x square out |
| extras |
Includes
voltage control of frequency
LED
status indication of frequency |
|
|
Noise |
| outputs |
1
x white noise out
1 x coloured noise out
1 x random voltage out |
| extras |
Includes
red/blue control of violet noise |
|
|
Glide |
| inputs |
1
x CV in |
| outputs |
1
x CV out |
| extras |
Includes
on-board/off-board jumper option for linear and exponential
glide slopes |
|
|
Sample
& Hold |
| inputs |
1
x CV in
1 x signal in |
| outputs |
1
x CV out
1 x GATE out (optional)
1 x TRIGGER out (optional)
1
x Uncommited Inverter |
|
|
Ring
Modulator |
| inputs |
1
x X input
1 x Y input |
| outputs |
Sum
and Difference of X and Y |
|
|
Main
PCB |
- All
of the connections for inputs, outputs and panel components
are bought out to the edge of the board on a 0.1" pitch
allowing for several termination options including:- hard-wiring,
terminal-pin termination, crimped termination and screw-terminal
connection.
- All
trimpots are bought out to the edge of the pcb
|
