|
3D Model
![](../../images/clear_spacer.gif)
|
Overlay
![](../../images/clear_spacer.gif)
|
Plan View
![](../../images/clear_spacer.gif)
|
Schematics
![](../../images/clear_spacer.gif)
|
|
|
|
|
|
Constructors should refer to the Component Overlays along with,
the PCB Bill of Materials for the current value of all components, and
the General Construction Notes for general PCB assembly guidelines.
Jumper JP101 lets you enable and set the 'mode' of the [FEEDBACK].
With the jumper shorting 1-2 (UP) you will get -Ve feedback while in the 2-3 (DOWN) position it will be +Ve feedback.
You may use either a VTL5C3/2 or 2 hand-matched VTL5C3.