|
3D Model |
Overlay |
Plan View |
Column 1 PCB |
|
|
|
Column 2 PCB |
|
|
|
Column 3 PCB |
|
|
|
Column 4 PCB |
|
|
|
ES15 PCB |
|
|
|
Constructors should refer to the Component Overlays along with,
the Bill of Materials for the current value of all components, and
the General Construction Notes for general PCB assembly guidelines.
-
Fit all components to the boards following normal assembly guidelines except for the LEDs and R409
-
Mount the Column 3 assembly to the front panel and secure firmly using the supplied nuts for the 2 outer jacks
-
Form and install the 2 LEDs and solder in to place
-
Remove the assembly from the panel
-
Mount the Column 4 assembly to the front panel and secure using the supplied nuts for all jacks
-
Form and install the LED and then solder in to place
-
Mount the other assemblies to the front panel
-
Mount the backboard ensuring the correct alignment of the IDC connectors