3D Model	Overlay	Plan View
Column 1 PCB
Column 2 PCB

Constructors should refer to the Component Overlays along with,
the Bill of Materials for the current value of all components, and
the General Construction Notes for general PCB assembly guidelines.

1. Assemble 5x Jack Carrier Boards
2. Assemble 1x Switch Carrier Board
3. Fit all components to the boards except for the Switch Carrier and Jack Carrier sub-assemblies
4. Mount D201 & D201 across C202 as shown here
5. The 3x CGS508 GAIN CELLS can be fitted and secured using the supplied bolts and spacers
6. Mount the Jack Carrier sub-assemblies on to the Column 1 PCB but do not solder in to place
7. Offer the assembly up to the panel and secure using the supplied nuts
8. Mount the Jack Carrier and Switch Carrier sub-assemblies on to the Column 2 PCB but do not solder in to place
9. Offer the assembly up to the panel and secure using the supplied nuts. Ensure that the switch toggle action is vertical
10. Fit the 10-way connecting IDC cable