|
3D Model |
Overlay |
Plan View |
CGS733A PCB |
|
|
|
CGS733B PCB |
|
|
|
Constructors should refer to the Component Overlays along with,
the Bill of Materials for the current value of all components, and
the General Construction Notes for general PCB assembly guidelines.
- Assemble the Switch Carrier board
- Fit all components except for the Switch Carrier sub-assembly and LED. Ensure that you mount R101, R103, R105, R107 & R109 on the CGS733A PCB flush to the board
- Mount the Switch Carrier sub-assembly to the CGS733B PCB but do not solder
- Offer the assembly up to the front panel and secure using the supplied nuts and washers
- Solder the Switch Carrier sub-assembly assembly in to place
- Install the LED and solder in to place
- Mount the CGS733A assembly
- Connect the 2 assemblies using the supplied IDC cable