|
3D Model |
Overlay |
Plan View |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Constructors should refer to the Component Overlays along with,
the Bill of Materials for the current value of all components, and
the General Construction Notes for general PCB assembly guidelines.
-
Assemble all boards. Please note that the main PCB requires 2 small wire links to be added as shown on the overlay
-
Mount and secure all 3 column assemblies using the nuts supplied. Note that the Column 2 PCB must have the modified J6 connector
-
Mount the rear main board ensuring that the IDC headers are correctly aligned