The PSU-10 is a small power supply unit suitable for a number of applications including powering up to 3 Serge boats or 3 small EuroRack systems.

The PSU-10 is supplied, as standard, in a Hammond 1455K enclosure but can be purchased as a PCB sub-assembly for installation in your own enclosure.

The PSU-10A is capable of delivering +12V up to 750mA and -12V up to 1A.
The PSU-10B is capable of delivering +12V up to 1.5A and -12V up to 1A.

The lightweight (less than 400gms) and compact stand-alone unit is fitted with a DC 2.5mm input jack (tip = +ve) and 3x 4-pin MIC connectors making it an ideal solution for powering a 3 boat BOCGS or Serge system.

NOTE:

• The PSU-10A/B should be mounted in a well ventilated position.
• The surfaces of the PSU-10A/B enclosure may run hot-to-the-touch (typically 10-20C above ambient).
• We recommend using a 15VDC 2.4A power supply for the PSU-10A and 15VDC 4.6A for the PSU-10B when running up to maximum loading. Lower rated supplies can be used (MUST be 15VDC) but the units will have a reduced output capacity
• The PSU-10A/B incorporates a GROUND Stud which should be connected to mating GROUND connectors on all connected boats
• The PSU-10A/B includes a 0V REFERENCE terminal for connecting to other equipment such as mixer/amplifiers or other systems.