Let's Go Shopping
Synth-A-Scope Module
Let's Go Shopping

The Synth-A-Scope Module offers the user the opportunity to build their own oscilloscope in to any package they desire.

This module is for the core oscilloscope which requires some additional circuitry in the form of an input buffer and range circuit. User control switches are simply wired direct to their relative points on the header. A suggested circuit for these is show here.

We currently use this module in our 3U ED702 Synth-A-Scope and 5U ED702D Synth-A-Scope but it can just as easily be built in to a 4U unit or a dedicated housing of your own choice.

Parameter Value
Real-time sampling rate 1MSPS (max)
Sensitivity 1V/div - 5V/div in "1-2-5" steps
Timebase 10uS/div - 500uS/div in "1-2-5" steps
Capture buffer size 1024 bytes
Trigger modes Automatic/Normal/Single
Display size 2.4" (61mm)
Display resolution 320 pixels x 240 pixels
Input impedance 1M ohm/20pF
ADC resolution 12-bits

Module Details

Email:  elby-designs@bigpond.com
© Copyright 2000. All rights reserved.     Revised: September 26, 2023