3D Model	Overlay	Plan View
PCB

Constructors should refer to the Component Overlay along with, the Bill of Materials for the current value of all components, and the General Construction Notes for general PCB assembly guidelines.

1. Assemble the 3x Jack Carrier Boards (3D Model)
2. Assemble all components on the Main PCB except the Jack Carrier Boards at J102, J202 & J203
3. Place the Jack Carrier assemblies on to their respective headers but do not solder
4. Offer the assembly up to the front panel and secure using the supplied nut and washers
5. Solder the assemblies in to place.