EuroSerge Expanding Systems

These systems chart the expansion from a single-voice Serge system through to an idealised EuroSerge System with multi-voice patching capabilities.
Each system is presented here in an optimum sized case for that configuration.
If you intend to follow through to the full Classic Plus then you need to start with a 12U 168HP or similar capacity case.

ESS2 - Starter

The Starter builds upon The Teaser, but in a larger enclosure forming the basis of the Expanding Family, with the addition of
a VCO, VCF and VCA bridging the synthesizer space between the east and west coast approaches.

Get all the modules at once or add them later. It’s up to you.

ES05	Noise Source	1
ES06	Envelope Generator	1
ES07	1973 VCF	1
ES08	Audio Mixer	1
ES09	Positive Slew	1
ES15	Smooth & Stepped Generator	1
ES19	Negative Slew	1
ES20	1973 VCO	1
ES78	VCA	1
ASM306	Audio Out	1

Module Space Required: 106HP

System Enclosure(*)
6U 84HP

Starter

(*) These are the recommended minimum size enclosures and are offered from our Studio Series of enclosures.
Larger enclosures should be considered if you wish to cater for future expansion.
Please email us if you wish to look at alternate enclosure solution or configurations